Rain Barrel Irrigation – Get Started Easily
Here is an article I wrote a while back on how you can get started with rainwater barrel irrigation. It is really easy to do and you will find some useful tips on getting it going.
Rain Barrel Irrigation is starting to make a lot more sense.
With so much focus and attention on the current state of the environment you can now do your part to save the earth by using rain water to water your gardens and lawn.
You can also save money on your monthly water bill and dry climates can ensure they have water year round to water their crops.
A simple 50 gallon food grade container is the best choice for a rainwater barrel. You can usually get these rather inexpensively from a drum and barrel supplier.
50 Gallon Screw Top Plastic Food Grade Drum RAIN BARREL COMPOSTER FERMENTOR 55
End Date: Friday Aug-01-2014 19:57:45 PDT
Buy It Now for only: US $36.00
Buy it now | Add to watch list
The barrel needs to be a dark color. A clear barrel will allow in sunlight, which will cause algae to grow. You should have some kind of screen over the top of your barrel to keep out bugs, kids and pets.
Rain barrel irrigation will ensure you are using water that is not polluted with any other fertilizers or chemicals.
Strategically placed rain barrels will catch water run off from your roof.
If you have a lot of area that needs to be watered, you can place more than one barrel under different points of your roof. You can purchase rain gutter attachments that will feed the water directly into your rain water barrel.
You will be absolutely amazed at how much water you can accumulate from your roof. It is estimated for every inch of rain on a 1000 square foot roof, you will get 625 gallons of water. That is a lot of water, and just think of the money saved on the water bill.
A soaker hose can easily be attached to your barrel. Rain barrel irrigation supplies also include a pump that can actually run a sprinkler if needed.
You can also find a variety of different barrels that are very classy and will fit in with any landscaping.
Rain water irrigation systems are very inexpensive to set up, and do not require a lot of time and energy to use.
These systems used to be common place back in the old days. It is time to start saving the rainwater again and saving our planet using rain barrel irrigation.
More On Rainwater Irrigation
Moreover, rainwater harvesting is relatively simple to execute, especially for irrigation and cooling tower applications.
Harvesting rainwater is a time honored tradition. Millions of people all over the world throughout the ages used rain barrels and cisterns to collect roof.
The rain barrel system shown below is less complicated and usually just used for gardening or drip irrigation. In order to get water pressure from these rain barrels, they must be higher than the hose.
Drip Irrigation – a method of irrigation by which plants are kept hydrated by perforated pipes above or just under the soil. These techniques have been developed to keep plants hydrated with the least amount of water possible. Rainwater Storage – there are many types of rainwater storage systems that allow you to store rainwater for later use in the garden. These range from the old-fashioned rain barrel to many sophisticated storage facilities.
I’m simply referring to a rainwater tank (aka rain barrel), which is simply a large container that collects the water from your roof when it rains; allowing you to re-use that water at other times.
Drip irrigation, water saving, water conservation, back yard, water, DIY. A really easy project is to collect rainwater using a rainwater barrel. Anyone with a rain gutter can collect rain water from their roof.
My second option was to connect the overflow from my rain barrels to some irrigation pipe and then direct this rainwater to certain areas of my garden to soak into the soil and then slowly be used by my plants.
Mail this post